Article

October 26, 2026

Economic and Productive Evaluation of Aquaculture Systems: Comparison between Net Cages and Excavated Tanks

Marco Antônio Uliano; Evaldo Alves Dos Santos

DOI: 10.22167/2675-6528-202601171

Article prepared by the ResumeAI tool, an artificial intelligence solution developed by the Pecege Institute focused on synthesis and writing.

Summary

Aquaculture has consolidated itself in Brazilian agribusiness, demanding economic analyses for decision-making regarding production systems and risks. The study aimed to analyze and calculate the economic feasibility of Nile tilapia (Oreochromis niloticus) aquaculture production systems, specifically net pens and excavated ponds, and their sensitivity to cost and price variations. The research, of an applied, quantitative, and comparative nature, was developed from a bibliographic, documentary, and primary data survey obtained from two properties in Mato Grosso do Sul. The fattening production cycle, lasting six to eight months, was considered. Implementation and operational costs, and revenue estimates were collected. The economic analysis used cash flows with a ten-year horizon and a minimum attractive rate of return of 10% per year, calculating financial indicators such as Net Present Value (NPV), Internal Rate of Return (IRR), Payback, and Profitability Index (PI). A sensitivity analysis was also performed to evaluate the financial robustness of the systems against market fluctuations. The results indicated that both systems presented economic feasibility, but the net pen system demonstrated superior performance, with an NPV of R$ 931,343.65, an IRR of 59.34%, and a simple payback of 1.67 years, evidencing greater efficiency in value generation and capital recovery. The excavated pond system, although feasible, presented inferior indicators and greater vulnerability to market variations. It was concluded that the net pen system presented itself as the most economically efficient alternative, but the choice of production system should also consider factors such as water resources and operational management.

Keywords: economic feasibility indicators; Fish farming; Excavated tanks; Net tanks; Tilapia.

1. Introduction

The Brazilian agribusiness has consolidated itself as one of the fundamental pillars of the national economy, contributing significantly to the country’s Gross Domestic Product (GDP). In 2024, for example, the sector represented 23.5% of the GDP, according to data from the Center for Advanced Studies in Applied Economics (CEPEA, 2025). Within this scenario of expressive growth, fish farming emerges as an activity of growing relevance, with a notable highlight for tilapia production (PEIXE BR, 2025).

The advancement of fish farming in Brazil is driven by a combination of favorable factors. The vast availability of water resources, the favorable climate for cultivation, the abundant production of grains that serve as inputs for feed, and the presence of feed factories contribute to the development and competitiveness of the sector (Kubitza, 2015). These elements attract investors and allow fish farming to offer high-quality protein at affordable prices, consolidating its position in the market.

In the productive sphere of fish farming, two systems stand out: the net-pen and the excavated pond. The net-pen system involves the installation of floating structures in rivers and lakes, where fish are confined. On the other hand, the excavated pond system consists of ponds built directly on the ground, requiring technical engineering planning to create an artificial environment suitable for fish production (Schulter; Vieira Filho, 2017).

The choice of the production method is a critical factor that directly influences productivity, profitability, and the risks associated with aquaculture (Kruger; Lalom; Gotardo, 2023). From an economic perspective, feasibility analysis makes it possible to identify which system guarantees the best financial return, considering all factors involved in an economic activity, such as initial investment, operational costs, revenues, and capital return (Souza; Souza, 2023; Elejalde, 2023). The selection of the production method seeks to optimize production at the lowest possible cost, always prioritizing the sustainability of the activity (Dantas et al., 2017; Ribeiro; Longhini; Santos, 2023).

Despite the growing relevance of fish farming, there is a gap in the availability of detailed technical and financial information that can assist fish farmers and investors in making strategic decisions. The lack of an in-depth comparison between net-pen and excavated pond systems hinders the clear identification of their economic advantages and limitations, especially in a scenario of fluctuating costs and market prices. Understanding how these different systems impact profitability is fundamental for the sustainable development of the sector.

In this context, this study is justified by the need to provide objective data and comparative analyses that fill this gap. By detailing the costs and returns of each system and evaluating their robustness against market fluctuations, the research aims to support decision-making, mitigate risks, and optimize resource allocation. Thus, the present study aims to analyze and calculate the economic feasibility of two Nile tilapia (Oreochromis niloticus) aquaculture production systems, specifically the net-pen and excavated pond systems, and to evaluate the sensitivity of these systems to variations in market costs and prices, providing objective parameters for costs and returns.

2. Material and Methods

The study was classified as applied research, quantitative and comparative in nature. The applied approach sought solutions for fish farming management, while the quantitative nature was based on the collection and analysis of numerical data on costs, productivity, and revenue. The comparative character focused on the analysis of two distinct production methods for Nile tilapia (Oreochromis niloticus) farming.

The investigation was developed through bibliographic and documentary research, complemented by primary data. Bibliographic research used scientific articles, books, dissertations, and technical reports from recognized institutions. Documentary research consulted information from institutional websites and sectoral databases, providing conceptual grounding and foundations on fish farming and economic feasibility analysis.

The unit of analysis consisted of two Nile tilapia (Oreochromis niloticus) aquaculture production systems: the net-pen system and the excavated tank system. Primary data collection occurred on two rural properties located in the municipalities of Aparecida do Taboado and Dourados, in the state of Mato Grosso do Sul.

The properties were selected based on the availability of organized and reliable information. Records of settlement, input control, feed and medication consumption, as well as detailed production data, were included. This selection aimed to ensure the reliability of the data for the economic and productive analysis of the systems.

The production cycle considered was the Nile tilapia grow-out, with an average duration of six to eight months per batch, until the fish reach a commercial weight between 700 g and 1 kg. Start-up costs were surveyed, covering infrastructure, equipment purchase, and initial labor. Operational costs, such as the acquisition of fingerlings, feed, electricity, maintenance, depreciation, and continuous labor, were also collected.

The consultation of cost and operational data was carried out directly with the producers of the mentioned properties. For the revenue estimation, the average selling price of tilapia was used as a reference, according to updated data from the Center for Advanced Studies in Applied Economics (CEPEA). All these elements were organized into financial spreadsheets, serving as the basis for comparative analysis.

The comparative economic analysis was structured using cash flow spreadsheets, with a ten-year horizon. A minimum attractive rate of return (MARR) of 10% per year was adopted, defined based on the average yield of pre-fixed Treasury Direct bonds. This MARR was used to evaluate the return on investment in relation to conservative financial investments.

Based on the cash flows and the WACC, the financial indicators were calculated: Net Present Value (NPV), Internal Rate of Return (IRR), Payback (simple and discounted), and Profitability Index (PI). The NPV was determined by the sum of the future discounted cash flows, subtracting the initial investment. The IRR was adjusted until the NPV was equal to zero, and the Payback estimated the investment recovery period.

The Excel software was used for the preparation of the cash flow spreadsheets and for the calculation of financial indicators. Complementarily, a sensitivity analysis was performed. This analysis evaluated the financial robustness of the systems against variations in feed costs and fish selling price, recalculating the economic indicators for different scenarios.

3. Results and Discussion

The economic analysis of Nile tilapia aquaculture production systems, specifically net cages and excavated ponds, revealed important distinctions in their economic feasibility and robustness against market scenarios. The evaluation was based on detailed premises for the construction of cash flows, covering implementation and operational costs, as well as revenue estimates. The results obtained were compared with a Minimum Attractive Rate of Return (MARR) of 10% per year, established based on the average yield of pre-fixed Treasury Direct securities, indicating the economic attractiveness of the investment. It is relevant to note that the analyses considered an equity investment, without the inclusion of financial expenses.

Productive and zootechnical data of the batches

The tilapia production batches selected for the analysis were sized to correspond to the volume of fish housed in both systems. In the net-tank system, 50,400 tilapia were housed, while in the excavated-tank system, the stocking was 50,000 fish. A mortality of 11.12% was observed in the net tanks and 5.40% in the excavated tanks. The final production in the cycle was 38,349 kg for net tanks and 40,820 kg for excavated tanks, with final average weights of 856 grams and 863 grams, respectively. The cycle duration was six months for net tanks, allowing two cycles per year, and seven months for excavated tanks, resulting in 1.71 annual cycles. The feed conversion ratio was 1.372 for net tanks and 1.409 for excavated tanks, with feed consumption of 49,848.88 kg and 54,697.24 kg, respectively.

The observed differences in productive and zootechnical data, such as mortality rate and feed conversion, demonstrated a significant impact on the final economic feasibility of the systems. Higher mortality in net cages, for example, implies direct losses in the final biomass sold and an increase in costs associated with fish acquisition and inputs consumed by these animals. On the other hand, feed conversion, which measures the efficiency with which fish gain weight relative to feed consumed, directly affects feed costs and the duration of production cycles. Batches with better feed conversion tend to have lower feed costs and shorter production cycles, optimizing profitability.

Initial investment required

The determination of implementation costs was carried out based on the productive structures and equipment necessary for each system, using primary data collected from the analyzed properties. For the net-cage system, the initial investment totaled R$ 345,300.20. The main items included 56 net cages of 9 m³ (R$ 179,200.00), an anchoring system (R$ 18,000.00), a 60 m² floating walkway (R$ 22,000.20), a 5-ton floating feed silo (R$ 22,000.00), a 10 m barge (R$ 50,000.00), a boat with a 15 HP engine (R$ 25,000.00), handling equipment (R$ 8,100.00), and costs for technical project, licenses, and miscellaneous fees (R$ 21,000.00). These investments were sized for a grow-out capacity of 50,400 tilapia, ensuring the stability and safety of the structures and the operationalization of daily management.

In the excavated tank system, the initial investment was significantly higher, totaling R$ 666,400.00. Costs were concentrated on the acquisition of 1.5 hectares of bare land (R$ 180,000.00), excavation of ponds and slopes in 12,500 m² (R$ 275,000.00), supply and drainage system (R$ 27,000.00), construction of three monk structures (R$ 24,600.00), and fencing of the production area (R$ 17,500.00). For water oxygenation, 18 2 HP fountain-type aerators were dimensioned (R$ 37,800.00), in addition to an electrical panel and cabling (R$ 10,000.00), a metal silo for feed (R$ 8,000.00), six automatic feeders (R$ 21,000.00), a 15 kVA diesel generator (R$ 28,000.00), two hydraulic pumps (R$ 9,000.00), handling equipment (R$ 6,500.00), and technical project, licenses, and miscellaneous fees (R$ 22,000.00). The production capacity was 50,000 tilapia, and the choice of some semi-new equipment was a strategy to reduce the initial investment without compromising production efficiency.

Fixed costs of the production cycle

Fixed costs, representing the minimum expenses necessary for the operation of production systems regardless of production volume, were surveyed for one production cycle. For the net-tank system, fixed costs totaled R$ 42,341.69, distributed among depreciation (R$ 20,126.68), insurance and taxes (R$ 8,000.00), and maintenance (R$ 14,215.01). In the excavated-tank system, fixed costs were R$ 49,355.63, with depreciation (R$ 23,315.63), insurance and taxes (R$ 7,500.00), and maintenance (R$ 18,540.00). The depreciation of structures and equipment was calculated based on the initial investment, while the values for insurance, taxes, and maintenance were obtained from the reality of the properties. The difference in fixed costs reflects the larger quantity of equipment and infrastructure required for oxygenation and water management in the excavated-tank system, resulting in higher depreciation and maintenance.

Variable costs of the production cycle

Variable costs, which change according to the production level and batch management, were detailed for each production cycle. In the net-tank system, variable costs totaled R$ 212,334.14, with the main components being the acquisition of fingerlings (R$ 18,224.83) and, predominantly, extruded feed (R$ 157,023.96), which represented the largest share of operational cost. Other costs included electricity (R$ 1,575.00) for support demands, fuel (R$ 12,558.00) for boat usage, operational labor (R$ 17,200.00) for handling and harvesting, and technical assistance (R$ 5,752.35). For the accommodation of 50,400 tilapia juveniles, 49,848.88 kg of feed were consumed.

For the excavated tank system, variable costs totaled R$ 230,542.96. The acquisition of fingerlings (R$ 18,080.19) and extruded feed (R$ 169,014.47) were also the most significant items. Additionally, expenses were recorded for virgin lime (R$ 4,000.00) and common salt (R$ 60.00) for the preparation and maintenance of water quality in the ponds. Electricity (R$ 11,113.50) primarily served to operate the aerators, essential for water oxygenation at high stocking densities. Fuel (R$ 9,315.00) was used for the diesel generator, crucial for energy contingency. Operational labor (R$ 22,000.00) and technical assistance (R$ 5,959.80) were also considered, totaling 50,000 fingerlings and 54,697.24 kg of feed consumed.

Annualized costs

From the identification of fixed and variable costs per production cycle, the consolidation of this information into an annualized cost structure was carried out, considering the average number of production cycles for each system. For the net cage system, which operates with two cycles per year, the annualized costs were: depreciation (R$ 40,253.33), insurance and taxes (R$ 16,000.00), maintenance (R$ 28,430.02), fingerlings (R$ 36,449.66), extruded feed (R$ 314,047.92), electricity (R$ 3,150.00), fuel (R$ 25,116.00), operational labor (R$ 34,400.00), and technical assistance (R$ 11,504.70), totaling R$ 489,851.63. For the excavated pond system, with 1.71 cycles per year, the annualized costs were: depreciation (R$ 37,305.00), insurance and taxes (R$ 12,857.14), maintenance (R$ 31,782.86), fingerlings (R$ 30,994.61), extruded feed (R$ 289,739.09), quicklime (R$ 6,857.14), common white salt (R$ 102.86), electricity (R$ 19,051.71), fuel (R$ 15,968.57), operational labor (R$ 37,714.29), and technical assistance (R$ 10,216.80), summing to R$ 451,026.14. This annualization allowed for a consistent comparison between the models and served as the basis for the cash-flow statement.

Revenue and Cash Flow

The revenue obtained from the sale of live tilapia was calculated based on annual production and the average selling price per kilogram, using data from the Center for Advanced Studies in Applied Economics (CEPEA) as of 12/05/2025 as a reference. The net cage system, with two annual production cycles of six months each, generated an annual revenue of R$ 715,745.74. The excavated tank system, with approximately 1.71 annual cycles of seven months each, generated an annual revenue of R$ 761,862.61. The cash flow was structured for a ten-year analysis horizon, considering the tax incidence under the Presumptive Profit regime, widely adopted by commercial aquaculture companies. The initial investment, allocated in period zero, corresponded to the project’s CAPEX, allowing for the identification of the capital recovery period and the comparison of economic performance between the systems.

Upon observing the accumulated discounted cash flow over the ten years, it was found that the net cage system presented a final Net Present Value (NPV) of R$ 931,343.65. On the other hand, the excavated tank system achieved an NPV of R$ 339,473.11. These values, which represent the sum of all future cash flows brought to present value and subtracted from the initial investment, indicate that both systems are economically viable, as they resulted in positive NPVs. However, the net cage system demonstrated a significantly greater capacity for value generation over the analysis period, surpassing the performance of the excavated tank system.

Economic indicators of production systems

The complementary economic indicators confirmed the feasibility of both systems, but highlighted the superiority of the net-tank system. For the net-tanks, the Net Present Value (NPV) was R$ 931,343.65, the Internal Rate of Return (IRR) reached 59.34%, the Simple Payback was 1.67 years, the Discounted Payback was 1.92 years, and the Profitability Index (PI) was 3.70. These results indicate a robust financial return and a quick recovery of the invested capital, with an IRR substantially higher than the Minimum Attractive Rate of Return (MARR) of 10% per year.

In contrast, the excavated tank system, although also viable, presented lower indicators. Its NPV was R$ 339,473.11, the IRR of 17.87%, the Simple Payback of 5.25 years, the Discounted Payback of 6.65 years, and the Profitability Index of 1.51. Although the IRR is still higher than the MARR, the investment return period is considerably longer, and the Profitability Index is lower, suggesting lower efficiency in generating value per unit of invested capital compared to the net tank system. The analysis of these indicators reinforces the greater economic attractiveness of the net tank system under the evaluated conditions.

Sensitivity analysis

To deepen the analysis and verify the financial robustness of the systems, a sensitivity analysis was performed, varying the feed cost and the selling price of tilapia at intervals of 10% and 20% more and less. In the net-cage system, a 20% reduction in feed cost resulted in an NPV of R$ 1,317,281.36 and an IRR of 77.84%, with a simple payback of 1.28 years. Even with a 20% increase in feed cost, the project maintained a positive NPV of R$ 545,405.95 and an IRR of 40.35%, with a simple payback of approximately 2.40 years. The Profitability Index remained above 1 in all scenarios, ranging from 4.81 to 2.58, demonstrating the net-cage system’s ability to remain attractive even in the face of significant cost increases.

The variation in the selling price of tilapia for the net-cage system showed an even greater impact on the indicators. In the scenario of a 20% reduction in selling price, the NPV was R$ 100,747.25 and the IRR reached 16.33%, with a simple payback estimated at 4.82 years. However, a 20% increase in selling price raised the NPV to R$ 1,761,940.06 and the IRR to 98.93%, reducing the investment recovery time to about 1.01 year. The Profitability Index followed this behavior, varying from 1.29 in the most unfavorable scenario to 6.10 in the most favorable one, confirming the high robustness of the net-cage system against market fluctuations.

For the excavated tank system, the sensitivity analysis revealed greater vulnerability. A 20% reduction in feed cost resulted in an NPV of R$ 652,123.38 and an IRR of 24.93%, with a simple payback of 4.39 years. However, a 20% increase in feed cost made the NPV negative at -R$ 60,005.13 and the IRR reduced to 8.57%, a value below the MARR, indicating that the investment would become unfeasible, as it would not be recovered considering the discounted cash flow. In scenarios of reduced tilapia selling price, the excavated tank system also proved unfeasible, with a negative NPV of -R$ 396,538.16 for a 20% reduction and -R$ 28,532.52 for a 10% reduction, resulting in a negative IRR or below the MARR.

With the increases in the marketing price, the excavated tank system showed significant improvement, with an NPV of R$ 707,478.75 and an IRR of 25.86% in the scenario of a 10% increase. When a 20% rise was considered, the NPV reached R$ 1,075,484.39 and the IRR reached 33.48%, reducing the simple payback to 2.69 years. These results indicate that economic efficiency is directly associated with the productive dynamics of each system. The higher productive intensity and the possibility of carrying out more cycles throughout the year in net tanks contribute to greater revenue generation and better utilization of invested resources. Furthermore, the lower implementation cost of the net tank system reduces the need for initial capital and accelerates the return on investment, making it more accessible and financially attractive.

On the other hand, the excavated tank system presents greater capital immobilization, which impacts its competitiveness, especially in less favorable market scenarios. From an operational and structural perspective, the excavated tank system can offer advantages, such as direct implementation on the property, reducing dependence on public water bodies and initial logistical complexity. However, this system requires the availability of water resources for water intake and obtaining the due environmental permits and licenses. Proximity to the production structure provides greater control over operations, facilitating the management and logistics of inputs, granting the producer greater autonomy. In regions where there are no suitable water bodies for net tanks, the excavated tank system may be the only viable alternative.

In summary, the research results indicate that both Nile tilapia production systems are economically viable under the analyzed conditions, with positive financial indicators. However, the net cage system demonstrated superior economic performance, characterized by a higher NPV and IRR and a significantly shorter payback period, in addition to greater robustness against cost and price fluctuations. The excavated pond system, although viable in the base scenario, proved more vulnerable to market variations, potentially becoming unviable in adverse scenarios of increased costs or reduced prices. Thus, the choice of production system should consider not only financial indicators but also factors such as water resource availability, operational management, and the specific conditions of the market and the property.

4. Conclusion

The present study aimed to analyze and calculate the economic feasibility of Nile tilapia aquaculture production systems, specifically net cages and excavated tanks, and their sensitivity to cost and price variations. It was found that both systems showed economic feasibility under the analyzed conditions, with positive financial indicators. However, the net cage system demonstrated superior economic performance, evidenced by a Net Present Value (NPV) of R$ 931,343.65, an Internal Rate of Return (IRR) of 59.34%, and a Simple Payback of 1.67 years. These results indicated greater efficiency in value generation and a faster recovery of invested capital, driven by the lower initial investment requirement and the possibility of carrying out two production cycles annually, optimizing resource utilization.

In contrast, the excavated tank system, although viable with a NPV of R$ 339,473.11 and an IRR of 17.87%, presented inferior indicators and a longer investment payback period of 5.25 years. Sensitivity analysis revealed that the tank-network system maintained its attractiveness even with significant variations in feed costs and tilapia selling prices. On the other hand, the excavated tank system proved more vulnerable, potentially becoming unfeasible in adverse scenarios of increased costs or reduced prices, due to higher capital immobilization and lower productive intensity. The main contribution of this study lies in providing objective cost and return parameters, supporting the strategic decision-making of fish farmers and investors. However, the choice of production system transcends financial indicators, and should consider factors such as water resource availability, operational management, and the specific conditions of the market and property. For future studies, it is recommended to deepen the market analysis and production absorption capacity, as well as to conduct evaluations at different production scales and regions, aiming to increase the reliability of the results and the scope of decision support in the aquaculture sector.

Bibliographic References

Cepea – Centro de Estudos Avançados em Economia Aplicada. 2025. PIB do Agronegócio Brasileiro. Piracicaba: ESALQ/USP. Disponível em: https://www.cepea.org.br/br/pib-do-agronegocio-brasileiro.aspx. Acesso em: 2 set. 2025.

Kruger, S. D.; Lopes, A. C.; Gotardo, R. 2023. Análise da viabilidade das atividades agrícolas desenvolvidas em uma propriedade rural. Extensão Rural, Santa Maria, v. 30, n. 1: 25-42. Disponível em: https://periodicos.ufsm.br/extensaorural/article/view/68647. Acesso em: 11 set. 2025.

Kubitza, F. 2015. Panorama da aquicultura: principais espécies, áreas de cultivo, rações, fatores limitantes e desafios. Revista Panorama da Aquicultura, Rio de Janeiro, n. 150: 10-11.

Peixe BR – Associação Brasileira da Piscicultura. 2025. Anuário Peixe BR 2025: panorama da piscicultura no Brasil. São Paulo: Associação Brasileira da Piscicultura, v. 1, n. 1: 1-120. Disponível em: https://peixebr.com.br/Anuario2025/AnuarioPeixeBR2025.pdf. Acesso em: 3 set. 2025.

Schulter, E. P.; Vieira Filho, J. E. R. 2017. Evolução da piscicultura no Brasil: diagnóstico e desenvolvimento da cadeia produtiva de tilápia. Rio de Janeiro: IPEA. Disponível em: https://portalantigo.ipea.gov.br/agencia/images/stories/PDFs/TDs/td_2328.pdf. Acesso em: 7 set. 2025.

Souza, M. C.; Moraes, R. F. 2023. Viabilidade econômica da pecuária de leite e da pecuária

Article originating from the Final Course Work of the Specialization in Agribusiness of the MBA USP/Esalq

To learn more about the course, click here and access the MBX Academy platform

You may also like

November 17, 2026

Detection and Diagnosis of Diseases in Corn and Rice in Mozambique with Deep Learning

Mozambican agriculture depends on corn and rice, fundamental crops for food security, but their productivity is strongly affected by phytosanitary diseases, whose early and accurate identification remains a challenge in resource-limited contexts. The study aimed to develop and compare Deep Learning-based models for the automatic detection and diagnosis of diseases in corn and rice leaves in Mozambique. Three approaches were used: a classic Convolutional Neural Network (CNN) developed from scratch, and two transfer learning models, ResNet50 and MobileNetV2. The dataset consisted of images from public databases and collected in the field, which underwent cleaning, balancing, and artificial augmentation steps. The models were trained and evaluated with standard performance metrics, including accuracy, precision, recall, F1-score, Log Loss, and Cohen’s Kappa. The classic CNN presented the best overall performance, with 94% precision, recall, and F1-score, and 93% accuracy and Cohen’s Kappa. MobileNetV2 achieved 91% F1-score and 90% accuracy, standing out for its lower Log Loss (0.30) and training time (6h32min59s). ResNet50 reached 80% F1-score and 79% accuracy. It was concluded that Deep Learning techniques have high potential to support phytopathological diagnosis in real agricultural contexts, contributing to faster and more accurate decisions in the management of corn and rice diseases.

Keywords: Deep learning; Rice; Plant diseases; Corn; Computer vision.

November 17, 2026

Artificial intelligence in accounting operational routines and financial efficiency

The incorporation of Artificial Intelligence (AI) and automation tools has reconfigured the routines of Brazilian accounting offices, impacting productivity, error mitigation, and financial efficiency. These impacts were analyzed in a small accounting firm, specialized in serving service providers in the medical field in São Caetano do Sul, São Paulo. The research adopted a qualitative approach, with a single case study design and incorporated units of analysis. Data were collected through a structured questionnaire, applied via Google Forms between January and February 2026, to five professionals in the operational structure of the firm in a census survey. The treatment followed content analysis with a priori and emergent categories. All respondents declared the use of automated tools or tools with AI resources. The perception of reduced execution time, decreased operational errors, rework, and better use of the team’s time converged in 80% of affirmative responses and 20% partial responses. The most benefited activities were bank reconciliation, import of fiscal documents, and tax assessment, with visible gains on typing errors, duplicate entries, and incorrect classification. Human intervention remained indispensable in tax planning, scenario analysis, and verification of ancillary obligations. The overall evaluation of AI’s contribution was predominantly favorable, with moderation linked to the complexity of fiscal regulations.

Keywords: Content analysis; Process automation; Accounting 4.0; Small business; Digital transformation.

November 17, 2026

Factors influencing schedule management in sewage treatment plant “retrofit” projects

Projects involving “retrofit” in Sewage Treatment Plants (STP) are characterized by high complexity, operational restrictions, and multiple technical interfaces. The study analyzed the perception of the professionals involved regarding the management and adherence to deadlines in “retrofit” projects for sewage treatment plants, considering technical, operational, and organizational factors. The research was characterized as an applied study, with a quali-quantitative approach, designed as a field survey. Data analysis was performed using descriptive statistics and qualitative categorization, employing SWOT, risk matrix (Probability x Impact), and 5W2H action plan tools. The results indicated a high perception of clarity (77.8%) and realism of deadlines (100% agreement), evidencing consistent initial planning. However, 77.7% of respondents pointed out that rework and scope changes directly impacted deadline adherence. The integration between engineering, manufacturing, and Production Planning and Control (PPC) showed an intermediate evaluation (77.7% partial/total agreement), indicating fragility in interfunctional coordination. The risk matrix highlighted as critical: scope changes, operational limitations of the STP, and technical complexity, all with a high level. As a central improvement, the standardization of scope change control, analysis, and approval was proposed, aiming to reduce rework and increase schedule predictability.

Keywords: Performance; Integration; Planning; Rework; Risk.

November 17, 2026

B2C Acquisition in diagnostic medicine: strategic partnerships with specialized medical offices

The diagnostic medicine sector in Brazil operates with high dependence on health plan providers, which limits the financial autonomy of service providers. This study proposed and analyzed a direct patient acquisition model (B2C) for a highly complex diagnostic medicine institution, structured through partnerships with Oncology and Cardiology practices and operationalized by a personalized customer service called concierge. The investigation adopted a mixed-methods approach in three phases: a field survey with a structured questionnaire applied to 87 patients, mapping of the operational flow using “Service Blueprint”, and analysis of the conversion rate from 312 medical referrals registered in the pilot project. The results indicated that trust in medical referral achieved 92.0% agreement, establishing itself as the main factor for adherence. The convenience of performing the exam on the same day reached 78.2%, and the willingness to pay directly was 55.2%, with polarization associated with the predominance of health plan users. The “Service Blueprint” identified three critical points in the transitions between stages of the patient journey. The overall conversion rate was 51.0%, with superior performance in Oncology (58.2%) compared to Cardiology (45.0%), and the greatest loss was concentrated in the acceptance and scheduling stage (28.3%). It was concluded that the model demonstrated possible operational viability and indications of patient acceptance, conditioned by price transparency and a reduction in the interval between consultation and approach by the concierge.

Keywords: Direct payment; Patient journey; Supplementary health; Concierge service; Conversion rate.

November 17, 2026

The role of the school manager in promoting an inclusive culture: leadership and educational policies

The research analyzed the school manager’s performance in promoting an inclusive culture, considering the need to transform legal guidelines and pedagogical foundations into effective institutional practices. It was assumed that school inclusion requires planning, organization, and strategic leadership in the school’s daily operations. A qualitative approach of an applied nature was adopted, developed in three complementary stages: documentary analysis of Brazilian legislation on inclusive education, bibliographic review on school leadership and management, and data systematization using management tools such as SWOT analysis and the PDCA cycle. The results indicated that the school management’s performance directly influenced the consolidation of inclusive environments, especially in the organization of processes, continuous team training, and strengthening of a collaborative institutional culture respectful of diversity. Structural, pedagogical, and relational challenges that demanded planned interventions were also identified. Finally, a Practical Guide for School Managers was developed, with guidelines, protocols, and operational orientations for decision-making and the organization of inclusive processes. It was concluded that the construction of an inclusive culture depended on the management’s ability to articulate public policies, pedagogical practices, and institutional processes, consolidating inclusion as a permanent commitment in the school context.

Keywords: educational accessibility; educational equity; participatory management; strategic planning; institutional processes.

November 17, 2026

An AI artifact based on Design Thinking to support the elicitation of software requirements from user needs

The development of software oriented to user needs frequently faces challenges in requirements elicitation, stemming from ambiguities in natural language and communication failures. Given this, an intelligent artifact integrating Design Thinking and Artificial Intelligence was proposed and validated, focusing on the Empathy and Definition stages, to support the collection, interpretation, and structuring of user needs. The research, of an applied, qualitative, and exploratory nature, conducted a Proof of Concept in a controlled environment, employing hypothetical scenarios. The artifact operated through guided natural language interviews, organizing information into elements such as pain points, context, and impact, and generating traceable problem syntheses. The results indicated that the system organized unstructured reports, reduced ambiguities, and preserved the meaning of the original information in most cases. The ability to reorganize logically in complex scenarios was also observed, although with limitations in separating multiple problems and dependence on instructions. It was concluded that the artifact has potential as a support for requirements elicitation, improving the clarity and structuring of information, but requires supervision and contextual control.

Keywords: Design Thinking; Requirements Elicitation; Requirements Engineering; Artificial Intelligence; Natural Language Processing.

November 17, 2026

The Extinction of the Monophasic Tax System in the Pharmaceutical Industry in Light of the Tax Reform

The consumption Tax Reform, established by Constitutional Amendment No. 132/2023, introduced structural changes to the Brazilian tax system, with the replacement of the Social Integration Program (PIS) and the Social Security Financing Contribution (COFINS) by the Contribution on Goods and Services (CBS), in a dual Value Added Tax (VAT) model. The objective was to analyze the impacts of the extinction of the single-stage system on the pharmaceutical industry, in light of the new regulatory design and its economic and legal effects. A qualitative, exploratory research was conducted through a case study and documentary analysis of legislation and specialized doctrine. It was examined whether the end of the single-stage system would imply a relevant increase in the tax burden for the sector. The results indicated that, although the formal overcoming of the single-stage system has occurred, the material exemption of medicines has been preserved, mainly due to the application of reduced rates of 60% and, in certain cases, a zero rate of the Tax on Goods and Services (IBS) and CBS. The change in model may cause occasional variations in revenue collection, without characterizing a structural increase in the tax burden, tending towards neutrality over time. It was preliminarily concluded that the Tax Reform reorganized the taxation technique in the pharmaceutical industry, replacing a concentrated regime with more transparent exemption mechanisms. This approach proved compatible with the principles of neutrality, full non-cumulativeness, and fiscality, maintaining tax protection for essential medicines and aligning fiscal policy with the fundamental right to health.

Keywords: CBS; COFINS; IBS; Dual VAT; PIS.