Article

October 19, 2026

Analysis of Strategies for Resource and Cost Management in Residential Architectural Projects

Analysis of Strategies for Resource and Cost Management in Residential Architectural Projects

Rebeca Melo Braga; Aline Gisele Zanão Benatto

DOI: 10.22167/2675-6528-202601345

Article prepared by the ResumeAI tool, an artificial intelligence solution developed by the Pecege Institute focused on synthesis and writing.

Summary

The growth of the civil construction sector and its impact on Brazilian socioeconomic development pose significant challenges for architecture firms in the country, such as work overload, poor remuneration, and delivery delays. Strategies for managing resources and costs in residential architectural projects were analyzed and evaluated, seeking to identify practices, tools, and impacts on efficiency. The methodology employed an online questionnaire, of a quantitative and qualitative nature, applied to professionals from various regions and positions in architecture firms, investigating profile, management processes, resources, costs, tools, and challenges. The predominance of small-sized firms was observed, where partners/owners handled multiple projects with often informal or non-existent planning. Low adoption of structured methodologies, digital tools, and risk and cost analysis was found. Although skilled staff was considered the most essential resource, human resource planning was neglected, with professionals being allocated based on availability rather than specialization, leading to overload and rework. Pricing and estimation of resources and costs were predominantly based on experience and basic metrics. It was concluded that informality in resource and cost management contributes to operational inefficiencies, highlighting the need to implement consolidated management practices, such as those proposed by PMBOK, to enhance the quality and financial sustainability of projects and firms.

Keywords: Challenges; Inefficiency; Optimization; Planning; PMBOK.

1. Introduction

The civil construction sector plays a vital role in the Brazilian socioeconomic development, being one of the largest job creators and an enhancer of the population’s quality of life (Monteiro, 2010). Its importance is corroborated by robust economic data, such as the seven-point-six percent growth of the Gross Domestic Product (GDP) of civil construction in 2021, the largest in the decade, reaching three hundred and fifty-nine point five hundred and twenty-three billion reais in 2024 (ABECIP, 2024; Célere, 2025). This dynamism is directly reflected in the architecture market, which follows real estate and housing expansion. Architecture, which plastically organizes space according to technique, program, era, and environment (Costa, 1995), is essential for any building, requiring detailed conception and structured planning. The demand for architectural services is growing, evidenced by the increase in Technical Responsibility Registrations (RRTs), which went from about seven million in 2015 to over one point seven million registered services in 2022 (CAU/BR, 2022). The economic contribution of architectural fees, which can range between five and twelve percent of the total cost of a work, demonstrates the profession’s added value (CAU/BR).

Despite the sector’s growth and relevance, architecture firms in Brazil face significant challenges that compromise the efficiency and sustainability of their projects. Problems such as delivery delays, workload overload, and inadequate remuneration are often associated with failures in planning, communication, and resource management (Martino, 2022). In smaller firms, which constitute the majority, financial and organizational difficulties result in low task division, long working hours, and high professional turnover (Couto, 2019). The absence of consolidated methodologies and the prevalence of intuitive management approaches contribute to rework and operational inefficiencies (Melhado & Souza, 2007). To mitigate these problems, applying project and cost management principles is fundamental. The *Project Management Body of Knowledge* (PMBOK) offers guidelines for project management, including resource planning, cost estimation, and schedule control (PMI, 2021). Cost Management, in turn, focuses on estimation and control to ensure the project stays within the approved budget (Bornia, 2010; Martins, 2019). The importance of precise cost allocation, as proposed by *Time-Driven Activity-Based Costing* (Kaplan & Anderson, 2007), underscores the need for structured approaches to profitability.

However, a gap is observed in the systematic adoption of these methodologies in many Brazilian architecture firms. Informality in management, limited use of digital tools, and a lack of structured risk and cost analyses indicate that consolidated project management practices are not fully explored, resulting in operational inefficiencies and compromising financial sustainability. Given the sector’s economic relevance and the persistent challenges affecting the efficiency and sustainability of these firms, understanding resource and cost management strategies is crucial for improving professional practices. The prevailing informality and underutilization of structured methodologies highlight a pressing need to investigate current approaches and their impacts. Thus, this work is justified by its potential contribution to improving project quality, optimizing resources, and enhancing the financial sustainability of architecture firms in Brazil. The general objective of this research is to analyze and evaluate the resource and cost management strategies adopted by architecture firms in residential architectural projects, seeking to identify current practices, tools used, main challenges faced, and impacts on operational efficiency, in order to propose recommendations for the implementation of more robust and effective management.

2. Material and Methods

This research was characterized as descriptive, according to Gil (2008; 2017), which aims to present the characteristics of specific phenomena, of a given population, or the relationships between variables. A quali-quantitative approach was adopted, seeking to integrate the depth of understanding of experiences and perceptions with the ability to measure and analyze numerical data. This combination allowed for a comprehensive analysis of resource and cost management strategies in architecture firms, identifying both measurable aspects and qualitative nuances of professional practices. The methodology employed was designed to collect data that could support a robust evaluation of the current scenario.

The study was conducted in a national context, covering architecture offices from diverse regions of Brazil, without specific geographical restriction, focusing on residential architectural projects. Data collection occurred from June 30, 2025, the period when the online questionnaire was made available to participants. The unit of analysis consisted of professionals working in these offices, regardless of their hierarchy or position. This geographical and professional profile scope sought to capture a diversified view of resource and cost management practices in the sector, reflecting the reality of different sizes and organizational structures.

The target population of the research comprised professionals working in architecture offices throughout Brazilian territory. The sample was defined by convenience, aiming to reach a total of fifty respondents. Selection criteria included professionals from various hierarchies, such as architects, designers, project managers, partners, directors, and interns, who were involved with residential architectural projects. This approach aimed to obtain a multifaceted perspective on management strategies, considering the experience of individuals in different positions and types of offices, from small to large, according to the classification established by the research.

The main data collection instrument was an online questionnaire, developed and administered through the “Google Forms” platform, configured as a “survey” type. This form was structured with a mix of closed, open, semi-open, and matrix-type questions, allowing for the collection of quantitative and qualitative data. Closed questions included multiple-choice options and satisfaction or importance scales, according to Babie (2003). For qualitative data collection, descriptive and interpretive questions were used, following Minayo (2014), and semi-open questions, which combine predefined options with the possibility of individual expression, according to Marconi (2003). The questionnaire consisted of five blocks and a total of twenty-four questions.

The questionnaire was organized into five thematic blocks to address the research objectives in a structured manner. Block 01, titled “Professional and Office Profile”, sought to characterize the respondents and their work environments, including office size, role played, and team structure. Block 02, “Office Management Process”, investigated internal planning and organization, process formalization, schedule and scope management. Block 03, “About Resource Management”, focused on human, operational, and financial resources, sizing, and planning. Block 04, “About Cost Management”, analyzed estimation, budgeting, and control practices. Finally, Block 05, “About Management Challenges, Strategies, and Impacts”, identified recurring problems and impacts on operational efficiency.

The data collection procedures involved the dissemination of the online questionnaire through various digital platforms. Contact with companies, offices, and self-employed professionals was made directly via WhatsApp, LinkedIn, and corporate emails. Additionally, the questionnaire was widely distributed on social networks such as Instagram and Facebook, allowing for broader reach. This direct and open communication strategy aimed to maximize the participation of professionals from different states and cities in Brazil, ensuring a robust database to support the analysis of practices and challenges in managing resources and costs in residential architectural projects, as per the research objective.

The research execution followed planned steps to ensure the integrity and ethics of the collected data. Before starting their participation in the questionnaire, all respondents had access to a Free and Informed Consent Form. This form, drafted in the official format adopted by the University of São Paulo (USP), detailed the study’s objectives, the procedures involved, the researchers’ identification, and how the data would be used. Participants needed to declare that they had read and agreed to the terms to proceed, ensuring that all information would be treated with confidentiality and used exclusively for academic purposes, preserving the collaborators’ identity.

The treatment and analysis of the collected data were carried out for the purpose of investigating methods and behaviors, describing the characteristics of the population group, and understanding existing problems, as recommended by Gil (2010). The responses to the closed-ended questions, which generated quantitative data, were used to measure hypotheses and apply statistical analysis. On the other hand, the responses to the open-ended and semi-open-ended questions, of a qualitative nature, were used to deepen the understanding of the respondents’ experiences, perceptions, and suggestions. This mixed approach allowed for a comprehensive evaluation, integrating the objectivity of numbers with the richness of qualitative insights, without detailing specific software or advanced statistical tests.

3. Results and Discussion

The analysis of the collected data, from 54 respondents, offers a comprehensive view of resource and cost management practices in architecture offices in Brazil, focusing on residential projects. The characterization of the sample revealed a predominant profile of professionals in leadership and ownership positions, which is crucial for interpreting the results, as their perceptions tend to reflect the strategic and operational vision of the business. As presented in Figure 1, the majority of participants, 62.1%, hold the position of Partner/Owner. This data is significant, as it suggests that the responses reflect the perspective of those who hold decision-making power and final responsibility for the office’s management. In contrast, architecture assistants or junior architects represent 17.2%, responsible architects 10.3%, interns 3.4%, and project managers/coordinators only 6.9%.

Source: Original research results

Figure 1. Current position in an architecture office

The predominance of partners/owners in the sample may indicate both greater engagement of these professionals in research aimed at improving management and a possible centralization of managerial responsibilities in smaller firms. This centralization, while it may expedite some decisions, as pointed out by Couto (2019), can also lead to work overload and a lack of task delegation, impacting overall efficiency. The low representation of project managers/coordinators (6.9%) is particularly noteworthy, suggesting that many architecture firms may not have a formal project management structure, with functions being absorbed by partners or other professionals. This corroborates the observation by Melhado and Souza (2007) that small firms frequently operate without consolidated methods, relying on the intuition and experience of the owners. The practical implication is that the formalization of roles and training in project management for all hierarchical levels, especially for those assuming multiple functions, could optimize task distribution and decision-making.

Still regarding the profile of the offices, the research investigated team size, a determining factor for operational capacity and management complexity. The results, detailed in Figure 2, reveal an overwhelming predominance of small offices. Specifically, 75.93% of respondents work in offices with up to 5 employees. Only 16.67% work in teams of 6 to 15 employees, and a minimal portion (3.70% and 1.85%) in offices with 16 to 50 or 51 to 100 employees, respectively. No respondent works in offices with more than 100 employees.

Source: Original research results

Figure 2. Total office staff size

This finding is fundamental to contextualize all other analyses, as the management strategies, challenges, and tools adopted are intrinsically different in small and large organizations. The prevalence of small offices in the residential architecture sector in Brazil reflects the market structure, often characterized by self-employed professionals or small teams seeking flexibility and personalized service (Couto, 2019). However, this structure also imposes considerable challenges, such as limitations in human and financial resources, difficulty in formalizing processes, and excessive dependence on a few individuals. The literature on small business management, such as that by Kaplan and Anderson (2007), often highlights that informality, although it may seem efficient at first glance, becomes a bottleneck as demand and project complexity increase. For these offices, implementing management methodologies adapted to their size, such as PMBOK (PMI, 2021) in its simplified version, is crucial to ensure sustainability and growth. This implies investing in training for partners/owners, who often combine technical and managerial roles, and in the adoption of tools that, even if basic, promote organization and control.

The average size of residential architectural projects executed by the offices was also a relevant point of investigation. Although not presented in a specific figure in this excerpt, the research indicates that 34.5% of respondents work with projects up to 150m², characterized as small-scale. The majority, 48.3%, execute medium-sized projects (150m² to 500m²), and only 17.2% deal with large-scale projects (over 500m²). The coexistence of small teams with a high incidence of medium and large complexity projects (totaling 65.5% of projects over 150m²) creates a scenario prone to overload and inefficiency. Larger and more complex projects require more robust planning, greater coordination, and allocation of specialized resources, which is a challenge for lean teams. The lack of adequate planning, as mentioned in the abstract, tends to generate difficulties in resource and schedule management, resulting in delays and rework (Martino, 2022). The practical implication is that small-scale offices that accept projects of greater complexity need to compensate for personnel limitations with more rigorous project management processes, including clear scope definition, realistic schedules, and efficient internal and external communication to mitigate risks.

Regarding the office management process, the research delved into the number of projects carried out monthly and how planning is conducted. It was observed that 79.3% of offices execute up to 5 projects per month, and 13.8% execute 6 to 15 projects. On an individual level, 65.5% of respondents are involved in up to 5 projects simultaneously, and 31% in 6 to 15 projects. This data, although not illustrated by a specific figure here, reinforces the idea that, in small teams, the same professional tends to be involved in multiple projects. This multitasking, if not well managed, can lead to a dispersion of focus, a reduction in quality, and an increase in stress, as warned by Couto (2019) when discussing high turnover in smaller offices. The central question is whether human resources are being adequately managed for the existing workload. The lack of clear project portfolio management can result in inadequate prioritization and inefficient use of team time.

Outsourcing project phases is a strategy that can optimize time, but also introduce risks. The research revealed that 48.3% of offices do not outsource any phase, while 27.6% outsource partially, with the most cited phases being architectural survey and rendering. The decision not to outsource, although it may ensure greater control and perceived quality, can aggravate team overload, especially when a small group of employees is responsible for sequential and interdependent phases. External dependency, on the other hand, can cause delays if partners do not meet deadlines or quality standards. Risk Management, a fundamental component of PMBOK (PMI, 2021), becomes even more critical in outsourcing scenarios, requiring clear contracts, constant monitoring, and contingency plans. The implication is that offices must carefully evaluate the cost-benefit of outsourcing, considering not only the financial cost but also the impact on the schedule, quality, and internal workload.

The planning for new projects is one of the pillars of efficient management, and the research results in this regard are concerning. Only 31% of offices execute planning collectively, with managers and operational staff. A significant portion, 34.5%, defines planning by managers and informally passes it on to the team, while 24.1% state they do not have a formal planning process. Only 26.32% use standardized documentation or platforms. These data, although not illustrated by a specific figure in this excerpt, indicate a predominance of informal or non-existent planning practices. Informality compromises control, predictability, and decision-making, making projects vulnerable to deviations and unforeseen events. Gil (2010) emphasizes that systematic planning is essential for investigating methods and behaviors and understanding problems, which is hindered by the absence of formalization. The lack of a formal planning process is one of the main factors contributing to operational inefficiency, such as unplanned overtime and workload overload, as will be discussed later.

The documentation produced during the planning phase is an indicator of management maturity. The survey showed that the project scope documented and approved by the client led the responses with 65.5%. However, essential documents such as the cost spreadsheet, responsibility matrix, and risk analysis show low adherence. Only 34.5% are concerned with creating a list of necessary resources, and a detailed schedule is prepared by 44.8% of respondents. The low adherence to these essential documents, as detailed in Figure 8 (not included here to maintain the figure limit), highlights weaknesses that can lead to failures, rework, and misalignment. The absence of a responsibility matrix, for example, can generate conflicts and inefficiencies in task allocation, while the lack of a detailed cost spreadsheet makes financial management reactive and less effective. The formalization of these documents, even in small offices, is a practice recommended by the PMBOK (PMI, 2021) to ensure clarity, control, and effective communication.

Resource management, one of the central focuses of the research, revealed a notable contradiction. Although 96.6% of respondents consider a capable team the most essential resource, human resource planning is what presents the worst management. For human resources, 29.6% of offices do not perform any type of planning, 46.3% do only basic planning, 24.1% detailed planning, and none adopt planning with risk analysis. This alarming data, illustrated in Figure 19 (not included here), strongly contrasts with the perception of its importance. This negligence in human resource planning, as pointed out by Koskela (1992), leads to waste, rework, delays, and directly affects project efficiency and quality. The allocation of professionals, for example, is often based on availability (who is least overloaded) rather than specialty or skill, as shown in Figure 3.

Source: Original research results

Figure 3. Professionals allocation

Figure 3 shows that, although 62.96% of offices claim to base allocation on specialty/skill, a significant portion of 16.67% still allocate based on availability. Furthermore, 11.11% base it on project complexity and scope, 5.56% on a fixed scale, and 3.70% is defined by the manager without specific criteria. This practice of allocating based on availability, rather than specialty, is a critical factor for workload overload and rework, as professionals may be assigned tasks for which they do not have the best qualifications or experience. Souza and Melhado (2007) corroborate that poor task distribution is one of the main causes of delays, and allocation based on specialties and skills is fundamental to optimizing productivity and ensuring execution quality. The practical implications are clear: it is imperative that offices develop a formal human resource planning system, including competency identification, workload assessment, and strategic professional allocation, as well as the implementation of development plans for the team.

Regarding the sizing of work hours, the research revealed that the majority (55.56%) stipulate hours based on experience with previous projects, 18.52% resort to a documented historical basis, and 12.96% do not have prior sizing. Only 7.41% define by the deadline requested by the client and 5.56% by metrics of m² or project type. This data, presented in Figure 12 (not included here), indicates a strong dependence on subjective and undocumented estimates. This approach, although common in small offices, is inherently flawed, as individual experience may not be replicable and does not consider variations in project complexity or team productivity. Martins (2019) and Bornia (2010) emphasize the importance of activity-based and time-based costing methods for accurate pricing and effective control. The absence of prior and documented sizing of work hours leads to the need for unplanned overtime and an increase in programmed costs, directly impacting the office’s profitability. The adoption of time control tools and the creation of a database of previous projects with metrics of hours worked would be crucial steps to improve this practice.

Cost management is another fundamental pillar for the financial sustainability of architecture firms. The research investigated how values are priced and how costs are estimated. Figure 13 (not included here) shows that the majority (36.84%) use their own methodology based on work hours for pricing, followed by value per m² (16.84%), percentage of the estimated work cost (15.79%), fixed value per project type (14.74%), CAU/BR Fee Schedule (10.53%), and market/competition-defined value (5.26%). Although the work-hour-based methodology is the most common, its effectiveness depends directly on precise sizing of these hours, which, as seen, is often subjective. Inadequate pricing, whether by underestimating time or by not considering all indirect costs, can lead to loss of profitability and devaluation of the architect’s work.

When questioning how project costs are internally estimated, the data is even more concerning. The most used method (56.60%) takes into account the project’s complexity and scope, which, although relevant, shows that the approach is relative to each professional’s perception. More objective and standardized methods, such as estimated execution time (16.98%), the firm’s own metrics (11.32%), CAU/BR Fee Schedule (9.43%), and project square footage (5.66%), are less utilized, according to Figure 14 (not included here). This dependence on individual perception makes budgets vulnerable to significant deviations and hinders project comparison. The lack of standardization in cost estimation is a weakness that exposes firms to financial risks, such as underpricing services and loss of profitability. Kaplan and Anderson (2007) advocate for Activity-Based Costing (ABC) as a more precise methodology for allocating indirect costs and understanding the true profitability of projects, which could be adapted for architecture firms.

The informality and lack of objectivity in cost quotation and estimation are reinforced when analyzing the use of structured cost management methodologies. According to Figure 4, 33.33% of respondents claim not to use a formal methodology, basing cost control solely on experience. Another 35.19% use spreadsheets and their own controls, but without a standardized or continuous process. Only 27.78% apply basic planning and control practices, and a minority of 3.70% adopt a structured methodology based on PMBOK principles. No one uses advanced tools and techniques such as EVM (Earned Value Management).

Source: Original research results

Figure 4. Cost management methodology

Summing the two most informal categories (they do not use formal methodology and use spreadsheets without a standardized process), 68.52% of offices operate without a consistent cost management methodology. This represents a considerable risk of budgetary deviations, loss of profitability, and difficulty in learning between projects. The absence of a cost baseline, continuous updating, and control with performance indicators, as recommended by the PMBOK (PMI, 2021), prevents offices from proactively monitoring financial performance and making data-driven decisions. The implementation of methodologies, even simplified ones, is essential to transform cost management from a reactive practice into a strategic approach. This includes defining budgets by stage, tracking expenses, and comparing them with the initial budget, allowing for adjustments and corrections throughout the project.

The use of technological tools for resource and cost management also reflects informality. Spreadsheets (Excel/Google Sheets) are the most used, with 35.92% of responses. Software with simple methodologies for project management (Trello, Notion, MS Project, etc.) appears as the second most predominant option (26.21%). However, 11.65% state they do not use any specific digital tool, 7.77% use time tracking systems, and 5.83% use integrated financial systems. ERP software has minimal adoption (1.94%). This data, presented in Figure 16 (not included here), solidifies the understanding that, although there is some level of organization, most offices lack integrated tools that allow for traceability, automation, and a consolidated view of costs and resources. The fragmentation of tools and reliance on manual spreadsheets increase the probability of errors, hinder collaboration, and limit the capacity for data analysis for strategic decision-making. The adoption of more robust project management software, even if low-cost, could centralize information and automate processes, freeing up professionals’ time for higher value-added activities.

The negative impacts of inefficient management are evident in the most frequent situations faced by offices. Unplanned overtime leads, with 58.5%, followed by workload overload and the need to postpone deliveries (17.65% and 16.81%, respectively). Rework due to communication failure with the client (35.8%) and due to internal communication failure (17%) are also recurring problems. Cash flow problems, conflicts in resource allocation, and resource idleness complete the picture, according to Figure 17 (not included here). This data demonstrates a strong correlation between the lack of planning identified in the previous graphs and its practical effects. Overtime and overload are direct consequences of inadequate estimates of the required workload and resource allocation based on availability rather than specialty. Inefficiency in human resources and cost management directly manifests in team productivity and delivery quality, generating dissatisfaction for both professionals and clients.

The project stages that most demand extra resources were also investigated. The executive project is the stage that frequently exceeds planned resources, confirming its complex and variable nature. Revisions and changes requested by the client appear with 45.3%, evidencing the effects of scope changes on planning. Harmonization with complementary projects and construction supervision also present as strong claims. The preliminary study, preliminary design, and legal design stages tend to demand fewer extra resources, according to Figure 18 (not included here). This questioning indicates that the two largest consumers of extra resources are: external factors (client changes) and a factor of intrinsic technical complexity (executive project), both manageable with a well-defined scope and detailed planning of deliverables. Change management, a crucial process in PMBOK (PMI, 2021), is fundamental to mitigate the impacts of scope changes, requiring clear communication with the client and formalization of each alteration.

The evaluation of the efficiency of current resource and cost management processes, on a scale of 0 to 10, revealed a scenario of inefficiency. In human resources planning, 29.6% of respondents state that the offices where they work do not carry out this type of planning, 46.3% carry out only basic planning, and 24.1% detailed planning. No respondent adopts planning with risk analysis. This is the resource considered most important (96.6% of respondents), but it is precisely the one with the worst planning management, according to Figure 19 (not included here). This dichotomy between the perception of value and management practice is one of the most critical findings of the research.

For equipment-type resources, the scenario is a bit better: 46.3% do basic planning, 31.5% detailed, 16.7% do not plan, and 5.6% perform risk analysis (Figure 20, not included here). Although there is some level of planning, the absence of risk analysis in most offices indicates that equipment failures or unforeseen needs (maintenance, upgrade, or acquisition) are not being anticipated. For software, 55.6% do basic planning, 20.4% detailed, 14.8% do not plan, and 9.3% include risk analysis (Figure 21, not included here). Although it is the category with the lowest rate of “no planning”, the predominance of basic planning indicates that issues such as version updates, license renewals, and team training for new software are likely not being addressed preventively.

Finally, regarding financial resources, planning presents itself as the most mature: only 7.4% do not carry out any type of planning, while the majority adopt some type of organization and use risk analysis (Figure 22, not included here). This demonstrates that offices understand that money control is essential for the survival of the business. However, this prioritization of financial planning over human and operational resources reveals reactive management, focused on money control, but with little integration between resources. The lack of holistic planning, which includes all types of resources, compromises overall efficiency and long-term sustainability.

The comparison of the results with the study by Couto (2019) on the management of small-sized architecture firms in the Belo Horizonte/MG region validates and contextualizes the collected data. Both studies present similar data: predominance of small teams (1 to 5 people), role accumulation, absence of a formal business model or plan, prevalence of informal information, centralized and artisanal management, and use of generic tools. The continuity of this scenario over six years and in different regions of Brazil suggests that these conditions are not a transient problem, but rather an existing culture in the management of Brazilian architecture firms. In both cases, it was noted that the firms prioritize contractual and client presentation documents, but neglect the essential internal controls to monitor and correct deviations during project execution.

This persistence of informality and negligence in human resources planning, the absence of risk analysis, and the low adoption of structured cost management methodologies reveal significant deficiencies. There is a pressing need for a change in attitude regarding how management is perceived and applied. The implementation of simplified and structured models, based on PMBOK principles (PMI, 2021), can transform management into a daily practice and not just an occasional one. This includes the formalization of management practices, time tracking, cost standardization, clear definition of responsibilities, and the use of management tools adapted to the reality of small offices, in order to improve financial and operational sustainability. Training in project management and awareness of the importance of integrated and proactive planning are fundamental steps for Brazilian architecture firms to overcome these challenges and achieve greater efficiency and competitiveness in the market.

4. Conclusion

It is concluded that the objective was achieved, allowing for the analysis and evaluation of the resource and cost management strategies adopted by architecture firms in residential projects. The research identified a predominance of informal practices and the underutilization of structured methodologies, especially in small firms, where partners/owners accumulate multiple roles. Human resource management, although considered essential, lacks adequate planning, resulting in allocation based on availability rather than specialty. Pricing and cost estimation are predominantly based on experience and subjective perception, without standardization or continuous control. These deficiencies culminate in operational inefficiencies, such as unplanned overtime, workload overload, and rework, compromising financial sustainability and project quality.

The limitations of this study include the sample size (54 respondents) and the exclusive focus on residential architectural projects, which may limit the generalization of the results to other segments of architecture or larger firms. Furthermore, the predominance of partners/owners in the sample may have influenced perceptions of management. For future studies, it is suggested to expand the research to medium and large architectural firms, as well as to other types of projects. It is also recommended to investigate the effectiveness of implementing project management methodologies specifically adapted for small firms, and to develop tools and training that promote the formalization and integration of resource and cost planning, aiming to improve the sector’s efficiency and competitiveness.

Bibliographic References

ABECIP – Associação Brasileira das Entidades de Crédito Imobiliário e Poupança. Construção civil cresce 4,3% e atinge PIB de R$ 359,523 bilhões. Disponível em: https://www.abecip.org.br/imprensa/noticias/construcao-civil-cresce-4-3-e-atinge-pib-de-r-359-523-bilhoes. Acesso em: 06 mar. 2025.

Babie, 2003 [Referência completa não encontrada no documento original]

BORNIA, Antônio Cezar. Análise gerencial de custos: aplicação em empresas modernas. São Paulo: Atlas, 2010. 232 p. ISBN 9788522459582.

CAU/BR Conselho de Arquitetura e Urbanismo do Brasil. Pesquisa CAU/BR 2022. Disponível em: https://www.caubr.gov.br/pesquisa2022/. Acesso em: 06 mar. 2025.

COSTA, Lúcio. Considerações sobre arte contemporânea (1940). In: Lúcio Costa, Registro de uma vivência. São Paulo: Empresa das Artes, 1995. 608p. il.

COUTO, Vanessa Kellen Xavier do. Gerenciamento de Escritórios de Arquitetura de Pequeno Porte: Técnicas de Planejamento Aplicadas (2019). Monografia (Especialização em Produção e Gestão do Ambiente Construído). Belo Horizonte: Universidade Federal de Minas Gerais, 2019.

CÉLERE. PIB da construção cresce 3,5% no segundo trimestre. Disponível em: https://celere-ce.com.br/construcao-civil/pib-da-construcao-cresce-35-no-segundo-trimestre. Acesso em: 05 mar. 2025.

Gil, 2008 [Referência completa não encontrada no documento original]

Gil, 2010 [Referência completa não encontrada no documento original]

Gil, 2017 [Referência completa não encontrada no documento original]

Guia do Conhecimento em Gerenciamento de Projetos (Guia PMBOK). 7 ed. Estados Unidos: PMI, 2021. PROJECT MANAGEMENT INSTITUTE (PMI).

KAPLAN, Robert S.; ANDERSON, Steven R. Time-driven activity-based costing: a simpler and more powerful path to higher profits. 1. ed. São Paulo: [s.n.], 2007. ISBN 9781422107367.

Koskela, 1992 [Referência completa não encontrada no documento original]

Marconi, 2003 [Referência completa não encontrada no documento original]

Martino, 2022 [Referência completa não encontrada no documento original]

MARTINS, Eliseu. Contabilidade de custos. São Paulo: Atlas, 2019. 399 p. ISBN 9788597017816.

Melhado & Souza, 2007 [Referência completa não encontrada no documento original]

Melhado e Souza, 2007 [Referência completa não encontrada no documento original]

Minayo, 2014 [Referência completa não encontrada no documento original]

MONTEIRO, D. C; Costa, A. C. R; Rocha, E. R. P. 2010. Perspectivas e desafios para inovar na construção civil. Banco Nacional de Desenvolvimento Econômico e Social 31: 407-410.

Souza and Melhado, 2007 [Full reference not found in the original document]

Article originating from the Final Course Project of the Specialization in Project Management of the MBA USP/Esalq

To learn more about the course, click here and access the MBX Academy platform

You may also like

November 17, 2026

Detection and Diagnosis of Diseases in Corn and Rice in Mozambique with Deep Learning

Mozambican agriculture depends on corn and rice, fundamental crops for food security, but their productivity is strongly affected by phytosanitary diseases, whose early and accurate identification remains a challenge in resource-limited contexts. The study aimed to develop and compare Deep Learning-based models for the automatic detection and diagnosis of diseases in corn and rice leaves in Mozambique. Three approaches were used: a classic Convolutional Neural Network (CNN) developed from scratch, and two transfer learning models, ResNet50 and MobileNetV2. The dataset consisted of images from public databases and collected in the field, which underwent cleaning, balancing, and artificial augmentation steps. The models were trained and evaluated with standard performance metrics, including accuracy, precision, recall, F1-score, Log Loss, and Cohen’s Kappa. The classic CNN presented the best overall performance, with 94% precision, recall, and F1-score, and 93% accuracy and Cohen’s Kappa. MobileNetV2 achieved 91% F1-score and 90% accuracy, standing out for its lower Log Loss (0.30) and training time (6h32min59s). ResNet50 reached 80% F1-score and 79% accuracy. It was concluded that Deep Learning techniques have high potential to support phytopathological diagnosis in real agricultural contexts, contributing to faster and more accurate decisions in the management of corn and rice diseases.

Keywords: Deep learning; Rice; Plant diseases; Corn; Computer vision.

November 17, 2026

Artificial intelligence in accounting operational routines and financial efficiency

The incorporation of Artificial Intelligence (AI) and automation tools has reconfigured the routines of Brazilian accounting offices, impacting productivity, error mitigation, and financial efficiency. These impacts were analyzed in a small accounting firm, specialized in serving service providers in the medical field in São Caetano do Sul, São Paulo. The research adopted a qualitative approach, with a single case study design and incorporated units of analysis. Data were collected through a structured questionnaire, applied via Google Forms between January and February 2026, to five professionals in the operational structure of the firm in a census survey. The treatment followed content analysis with a priori and emergent categories. All respondents declared the use of automated tools or tools with AI resources. The perception of reduced execution time, decreased operational errors, rework, and better use of the team’s time converged in 80% of affirmative responses and 20% partial responses. The most benefited activities were bank reconciliation, import of fiscal documents, and tax assessment, with visible gains on typing errors, duplicate entries, and incorrect classification. Human intervention remained indispensable in tax planning, scenario analysis, and verification of ancillary obligations. The overall evaluation of AI’s contribution was predominantly favorable, with moderation linked to the complexity of fiscal regulations.

Keywords: Content analysis; Process automation; Accounting 4.0; Small business; Digital transformation.

November 17, 2026

Factors influencing schedule management in sewage treatment plant “retrofit” projects

Projects involving “retrofit” in Sewage Treatment Plants (STP) are characterized by high complexity, operational restrictions, and multiple technical interfaces. The study analyzed the perception of the professionals involved regarding the management and adherence to deadlines in “retrofit” projects for sewage treatment plants, considering technical, operational, and organizational factors. The research was characterized as an applied study, with a quali-quantitative approach, designed as a field survey. Data analysis was performed using descriptive statistics and qualitative categorization, employing SWOT, risk matrix (Probability x Impact), and 5W2H action plan tools. The results indicated a high perception of clarity (77.8%) and realism of deadlines (100% agreement), evidencing consistent initial planning. However, 77.7% of respondents pointed out that rework and scope changes directly impacted deadline adherence. The integration between engineering, manufacturing, and Production Planning and Control (PPC) showed an intermediate evaluation (77.7% partial/total agreement), indicating fragility in interfunctional coordination. The risk matrix highlighted as critical: scope changes, operational limitations of the STP, and technical complexity, all with a high level. As a central improvement, the standardization of scope change control, analysis, and approval was proposed, aiming to reduce rework and increase schedule predictability.

Keywords: Performance; Integration; Planning; Rework; Risk.

November 17, 2026

B2C Acquisition in diagnostic medicine: strategic partnerships with specialized medical offices

The diagnostic medicine sector in Brazil operates with high dependence on health plan providers, which limits the financial autonomy of service providers. This study proposed and analyzed a direct patient acquisition model (B2C) for a highly complex diagnostic medicine institution, structured through partnerships with Oncology and Cardiology practices and operationalized by a personalized customer service called concierge. The investigation adopted a mixed-methods approach in three phases: a field survey with a structured questionnaire applied to 87 patients, mapping of the operational flow using “Service Blueprint”, and analysis of the conversion rate from 312 medical referrals registered in the pilot project. The results indicated that trust in medical referral achieved 92.0% agreement, establishing itself as the main factor for adherence. The convenience of performing the exam on the same day reached 78.2%, and the willingness to pay directly was 55.2%, with polarization associated with the predominance of health plan users. The “Service Blueprint” identified three critical points in the transitions between stages of the patient journey. The overall conversion rate was 51.0%, with superior performance in Oncology (58.2%) compared to Cardiology (45.0%), and the greatest loss was concentrated in the acceptance and scheduling stage (28.3%). It was concluded that the model demonstrated possible operational viability and indications of patient acceptance, conditioned by price transparency and a reduction in the interval between consultation and approach by the concierge.

Keywords: Direct payment; Patient journey; Supplementary health; Concierge service; Conversion rate.

November 17, 2026

The role of the school manager in promoting an inclusive culture: leadership and educational policies

The research analyzed the school manager’s performance in promoting an inclusive culture, considering the need to transform legal guidelines and pedagogical foundations into effective institutional practices. It was assumed that school inclusion requires planning, organization, and strategic leadership in the school’s daily operations. A qualitative approach of an applied nature was adopted, developed in three complementary stages: documentary analysis of Brazilian legislation on inclusive education, bibliographic review on school leadership and management, and data systematization using management tools such as SWOT analysis and the PDCA cycle. The results indicated that the school management’s performance directly influenced the consolidation of inclusive environments, especially in the organization of processes, continuous team training, and strengthening of a collaborative institutional culture respectful of diversity. Structural, pedagogical, and relational challenges that demanded planned interventions were also identified. Finally, a Practical Guide for School Managers was developed, with guidelines, protocols, and operational orientations for decision-making and the organization of inclusive processes. It was concluded that the construction of an inclusive culture depended on the management’s ability to articulate public policies, pedagogical practices, and institutional processes, consolidating inclusion as a permanent commitment in the school context.

Keywords: educational accessibility; educational equity; participatory management; strategic planning; institutional processes.

November 17, 2026

An AI artifact based on Design Thinking to support the elicitation of software requirements from user needs

The development of software oriented to user needs frequently faces challenges in requirements elicitation, stemming from ambiguities in natural language and communication failures. Given this, an intelligent artifact integrating Design Thinking and Artificial Intelligence was proposed and validated, focusing on the Empathy and Definition stages, to support the collection, interpretation, and structuring of user needs. The research, of an applied, qualitative, and exploratory nature, conducted a Proof of Concept in a controlled environment, employing hypothetical scenarios. The artifact operated through guided natural language interviews, organizing information into elements such as pain points, context, and impact, and generating traceable problem syntheses. The results indicated that the system organized unstructured reports, reduced ambiguities, and preserved the meaning of the original information in most cases. The ability to reorganize logically in complex scenarios was also observed, although with limitations in separating multiple problems and dependence on instructions. It was concluded that the artifact has potential as a support for requirements elicitation, improving the clarity and structuring of information, but requires supervision and contextual control.

Keywords: Design Thinking; Requirements Elicitation; Requirements Engineering; Artificial Intelligence; Natural Language Processing.

November 17, 2026

The Extinction of the Monophasic Tax System in the Pharmaceutical Industry in Light of the Tax Reform

The consumption Tax Reform, established by Constitutional Amendment No. 132/2023, introduced structural changes to the Brazilian tax system, with the replacement of the Social Integration Program (PIS) and the Social Security Financing Contribution (COFINS) by the Contribution on Goods and Services (CBS), in a dual Value Added Tax (VAT) model. The objective was to analyze the impacts of the extinction of the single-stage system on the pharmaceutical industry, in light of the new regulatory design and its economic and legal effects. A qualitative, exploratory research was conducted through a case study and documentary analysis of legislation and specialized doctrine. It was examined whether the end of the single-stage system would imply a relevant increase in the tax burden for the sector. The results indicated that, although the formal overcoming of the single-stage system has occurred, the material exemption of medicines has been preserved, mainly due to the application of reduced rates of 60% and, in certain cases, a zero rate of the Tax on Goods and Services (IBS) and CBS. The change in model may cause occasional variations in revenue collection, without characterizing a structural increase in the tax burden, tending towards neutrality over time. It was preliminarily concluded that the Tax Reform reorganized the taxation technique in the pharmaceutical industry, replacing a concentrated regime with more transparent exemption mechanisms. This approach proved compatible with the principles of neutrality, full non-cumulativeness, and fiscality, maintaining tax protection for essential medicines and aligning fiscal policy with the fundamental right to health.

Keywords: CBS; COFINS; IBS; Dual VAT; PIS.